info@generalpneumatic.com info@generalpneumatic.com
 







 
  A-B TOOLING KIT
 


The 8000 CSA system includes the standard accessories group including the flanger, standard and special tooling bars. Tool bar spacer, wrenches, squeezer sets, spacer shims, adjustable mandrel and other miscellaneous hardware items. Everything is useful in many ways to accomodate the nearly infinite number of special demands of tooling.

The 8000 CSA accepts standard squeezer tooling for rivets of all descriptions including semi-tubular and eyelets. The unique design of the 8000 CSA offers precise pressure settings and stroke control which guarantees first quality finished work. The 8000 CSA provides a smooth squeezing action necessary to generate proper cold metal flow. All hardware manufacturers emphasize the necessity for cold metal flow to assure proper retention of captive hardware and in most cases caution against using hardware installation with a hammer blow.

The 8000 CSA is equipped with our standard heavy duty foot contol FC-1 and guard, thereby freeing the operators hands for the workpiece manipulation. Shipped complete and ready to operate.

 
  AIR FILTER REGULATOR AND LUBRICATOR
 
1). Filters the air.
2.) Regulates the air from 90 to 100 P.S.I.
3.) Lubricates the air to the tool.
 
  CAROUSEL PARTS ATTACHMENT
 


The carousel will hold rivets, inserts, and is a great place to store squeezer dies and shims. It will attach to pre drilled holes in the stationary yokes. Shown is the 15KCSA with the 24 inch reach yoke.

 


 
  C-TOOLING KIT
 
Tooling set “C” designed to install #2 through #10 nuts, studs
and standoffs (Up to .05” in length). In unified and metric sizes using punches and anvils. The metric tooling set installs nuts and studs (up to 12 mm in length). Tooling set (C) is also used with the threaded mandrel for quick set-up with a fixed yoke with a minimum of 1-3/4” Gap.
 
  FOOT CONTROLS
 
FC-3 FC-4

3-WAY VALVE FOR
3000CS
6000CS
3000AS
6000AS

4-WAY VALVE FOR
8000CS
8000CSA
15KCS
15KCSA

 

Each stationary tool is equipped with the FC-3 or FC-4 foot control and guard, all hoses and connectors. Each foot control housing supplied with a heavy duty ribbed rubber base. A ¼” NPT female fitting provided for simple adaption to your air system. These foot control valves are designed for heavy duty everyday use. They are simple and reliable. As an added safety feature, all tools REVERSE DIRECTION IMMEDIATELY when the operator’s foot is removed.

 
  PEDESTAL MOUNT
 


The mounting pedestal incorporates built-in filter, regulator, and lubricator. It is shipped complete with all connectors and air fittings. It requires 90-100 P.S.I. air connection.


This stand can be used with the following tools.
1.) 15KCS, 15KCSA.
2.) 8KCS, 8KCSA.
3.) 6KCS.
4.) 3KCS.

 
  RIGHT ANGLE TOOLING HOLDER
 


Holds 3/16 Rivet Sets and Shims.

15KCS, 15KCSA.
8KCS, 8KCSA.
6KCS-6

 
  STANDARD ACCESSORY GROUP
 


The model 8000CSA and 15000CSA system includes the standard accessories group including the flanger, standard and special tooling bars. Tooling bar spacer, wrenches, squeezer sets, spacer shims, adjustable mandrel and other miscellaneous hardware items are also included. Everything is useful in many ways to accommodate the nearly infinite number of special demands of tooling.

 
  THREE QUARTER SHANK TOOLING
 


This tooling can be used instead of the ½” threaded mandrel. It will fit into the ¾” hole in the “CS” or the” CSA” yoke with standard tooling bar. Then use the 3/16” standard rivet sets.

 





Home / Applications / About / Hand-Held Riveters    
Contact / Heavy Duty Bench Mounted Riveters    
Accessories / Small Bench Mounted Riveters